inControl Systems' Special Hazard Tips

inControl Systems' Special Hazard Tips

How to Reduce Clean-Agent Installation Costs by 35%

Designing and commissioning the discharge pipe network for a clean-agent suppression system is a labour intensive process. Much of the time is spent designing the discharge pipe network and nozzle locations to meet very specific site, code, and performance requirements.
 
To make matters worse, site conditions can frequently change and available ceiling space can become unexpectedly occupied, requiring re-engineering. As a result, much of the cost of a clean-agent suppression systems is in the discharge pipe network, due to its high material cost and stringent performance requirements.
 
Many of the costly clean-agent installation requirements can be eased with three key features of the unique discharge nozzles supplied by inControl Systems. These features reduce pipe runs and material costs, lower engineering and installation time, and when combined, can reduce installation costs by over 35%.

Learn More

Introducing LINEA Series Micro Fire system from inControl Systems

Introducing LINEA Series Micro Fire system from inControl Systems

For Immediate Release

 

New Tube-based fire protection system for small applications

Ontario, Canada – March 7, 2017 – inControl Systems Inc., a Canadian manufacturer and supplier of fire protection systems, introduces LINEA Series, the new tube-based fire protection system for small applications.

The LINEA Series is an automatic fire ex­­­tinguisher using tube-based detection. This latest fire suppression product from inControl Systems acts fast to stop fire before it spreads. Damage and destruction of assets from severe fires is greatly reduced, if not eliminated completely, when a LINEA series automatic fire extinguisher is installed.  

Totally self-contained and fully automatic, LINEA series automatic fire extinguishers requires no external power or connections, while maintaining fire protection around the clock, delivering years of reliable protection. Installation takes just minutes.  

LINEA series automatic fire extinguishers utilize a pneumatic, multi-layer tube to detect a fire quickly. The detection tube is installed inside the enclosure, providing total coverage. The pressurized detection tube is very sensitive and bursts when exposed to heat from early stages of fire. When a fire is detected, the pressure in the tube is released at the detection burst point, allowing the cylinder valve to open and release the HFC-227ea extinguishing agent, thus putting out the fire.

The president of inControl Systems, Mr. Carmine Colarocchio, indicates, “At inControl Systems, we are very happy to introduce our new LINEA series automatic fire extinguisher. This type of extinguisher is well suited for providing protection against fires for small spaces and equipment. Over the years, we have seen many fires in industrial equipment and electrical enclosures. These fires have caused significant down-time for companies whose equipment has been damaged or destroyed due to fires.  With our new LINEA series automatic fire extinguisher, we are able to provide very fast reaction to stop fires, saving our customers value time and money from down-time.”

Mr. Colarocchio continues, “We have been working very hard to continue to grow our business organically by adding new products. We are also investing heavily in our sales and business development programs. Having new products to feed into our growing global distribution channels around the world will allow us to continue to grow our business and better serve our customer.”  

About inControl Systems Inc.

inControl Systems Inc. is a Canadian manufacturer and supplier of fire protection systems for industrial, commercial and marine projects. Since 1984, inControl Systems Inc has been designing and supplying fire protection systems and solutions around the world for important projects in many industrial sectors. Installations include projects in oil and gas, marine and offshore, and land-based projects such as machine protection, server rooms, power plants, steel plants and cement factories.

Along with the manufactured products, inControl Systems Inc designs and supplies complete engineered Fire Protection Systems, Fire Detection Systems and Flame and Gas Detection systems. inControl Systems Inc. provides products and solutions based upon internationally accepted standards and regulatory approvals to meet the requirements of the world’s most sophisticated and complex projects. 

For more information on inControl Systems Inc., please call us at +1 905 415 0400 or visit us on the web at www.incontrolsystems.net

Hong Kong Fire Services (HKFSD) Approval

Hong Kong Fire Services (HKFSD) Approval

Important News From inControl Systems

FOR IMMEDIATE RELEASE


TORRENT Series Automatic Fire Extinguishers by inControl Systems, receives Hong Kong Fire Services Department (HKFSD) Approval - Fire Protection for fire for small enclosures and spaces

Ontario, Canada – December 07, 2016 – inControl Systems Inc. a Canadian manufacturer and suppler of fire protection systems for industrial, commercial and marine installations, has recently received approval for their TORRENT series automatic fire extinguisher by the Hong Kong Fire Services Department (HKFSD) for the sale of the products into the Hong Kong and Macau markets.
 
Adding the regulatory approval of the HKFSD for the Hong Kong market to the existing UL and ULC approvals allows inControl Systems to continue growing sales around the world into new markets.
 
The TORRENT Series is a stand-alone, compact, tidy and cost effective fire suppression solution for small spaces such as telecom equipment enclosures, electrical closets, in-board motors of boats, and many more. TORRENT series automatic extinguishers require no manual intervention and will automatically detect and extinguish fires.  
 
Mr. Carmine Colarocchio, The President of inControl Systems, states, “we are excited to have received HKFSD approval. Hong Kong and the rest of the Asian markets are important opportunities for us as we continue to purse global expansion of our businesses. The TORRENT series, along with our engineered fire solutions, allows us to offer our customer base complete fire protection solutions for all of their needs.”
 
TORRENT series automatic fire extinguishers are easily installed with simple brackets, and require no piping or electrical connections, giving the customer peace of mind knowing their valuable assets will be protected against fire. Since the TORRENT series uses a clean-agent gas for suppressing fires, no clean up is required in the event of a discharge.

For pricing, a full description of features and functions of the TORRENT Series, as well as to view product videos, please visit http://www.incontrolsystems.net


About inControl Systems Inc.
inControl Systems Inc. is a Canadian based manufacturer and supplier of complete fire protection systems for industrial and commercial projects. Since 1984, inControl Systems Inc. has been designing and supplying fire protection systems and solutions for important projects in many industrial sectors around the world. Installations include projects in Oil and gas, marine and offshore, and land-based projects such as machine protection, server rooms, power plants, steel plants and cement factories.
 
Along with the manufactured products, inControl Systems Inc. designs and supplies complete engineered Fire Protection Systems, Fire Detection Systems and Flame and Gas Detection Systems.  inControl Systems Inc. provides products and solutions based upon internationally accepted standards and regulatory approvals to meet the requirements of the world’s most sophisticated and complex projects.

To have someone from our sales team contact, please click here contactus@incontrolsystems.net

 

Engine Shutdown Module Now Available for U.S. Coast Guard

Engine Shutdown Module Now Available for U.S. Coast Guard

FOR IMMEDIATE RELEASE

Engine Shutdown Module now available for U.S. Coast Guard Approved TORRENT Series by inControl Systems

Ontario, Canada – November 30, 2016 – inControl Systems Inc. a Canadian manufacturer and suppler of fire protection systems for industrial, commercial and marine installations, introduces their new Engine Shutdown module for their U.S. Coast Guard approved TORRENT series Fire Extinguisher.
 
The engine shutdown module is an important accessory for the TORRENT Series fire extinguisher when used in small marine installations.
 
In the event of fire, the system will discharge and the pressure switch simultaneously sends a signal to the Shutdown module to close down all devices and equipment connected to the shutdown relay box (e.g. engines, generators, ventilators, dampers). A red LED “DISCHARGED” light on the display activates along with a sharp acoustic alarm to alert the crew to the event.
 
Mr. Carmine Colarocchio, The President of InControl Systems, comments that, “adding the Engine Shutdown Module from inControl Systems, helps is complete our product range that we are offering to our customers for the small marine craft market.  In Canada and many other countries around the world, protection small boats, service vessels and ferries are critical. All too often we hear of damages and sometimes catastrophes when we ready about boat fires.  We hope to help reduce these with the TORRENT Series extinguishers.”
 
TORRENT series fire extinguishers are easily installed with simple brackets, giving the customer peace of mind knowing their valuable assets will be protected against fire. Since the TORRENT series uses a clean-agent gas for suppressing fires, no clean up is required in the event of a discharge.

For pricing, a full description of features and functions of the TORRENT Series, as well as to view product videos, please visit http://www.incontrolsystems.net


About inControl Systems Inc.
inControl Systems Inc. is a Canadian based manufacturer and supplier of complete fire protection systems for industrial and commercial projects. Since 1984, inControl Systems Inc. has been designing and supplying fire protection systems and solutions for important projects in many industrial sectors around the world. Installations include projects in Oil and gas, marine and offshore, and land-based projects such as machine protection, server rooms, power plants, steel plants and cement factories.
 
Along with the manufactured products, inControl Systems Inc. designs and supplies complete engineered Fire Protection Systems, Fire Detection Systems and Flame and Gas Detection Systems.  inControl Systems Inc. provides products and solutions based upon internationally accepted standards and regulatory approvals to meet the requirements of the world’s most sophisticated and complex projects.

To have someone from our sales team contact, please click here contactus@incontrolsystems.net

U.S. COAST GUARD APPROVAL

U.S. COAST GUARD APPROVAL

FOR IMMEDIATE RELEASE

TORRENT Series Automatic Fire Extinguishers by inControl Systems, receives U.S. COAST GUARD APPROVAL - Fire Protection for fire for small enclosures and spaces

Ontario, Canada – November 22, 2016 – inControl Systems Inc. a Canadian manufacturer and suppler of fire protection systems for industrial, commercial and marine installations, has recently received approval for their TORRENT series automatic fire extinguisher by the U.S. COAST GUARD
 
Obtaining the U.S. Coast Guard approval for the TORRENT Series opens a very large market of the small marine market for inControl Systems.
 
The TORRENT Series is a stand-alone, compact, tidy and cost effective fire suppression solution for small spaces such as in-board motors of boats. TORRENT series extinguishers are sold with manual remote actuation assemblies and engine shut-down modules, offering marine customers a very nice solution.
 
Mr. Carmine Colarocchio, The President of InControl Systems, states, “we are excited to complete the testing and approval process of USCG. The marine market is a very important market for inControl Systems as we continue to expand our fire protection solutions into exciting industries and markets. The US small marine market is very important to our company and we are happy to have a nice offering for this market”.
 
TORRENT series fire extinguishers are easily installed with simple brackets, giving the customer peace of mind knowing their valuable assets will be protected against fire. Since the TORRENT series uses a clean-agent gas for suppressing fires, no clean up is required in the event of a discharge.

For pricing, a full description of features and functions of the TORRENT Series, as well as to view product videos, please visit www.incontrolsystems.net
 
About inControl Systems Inc.
inControl Systems Inc. is a Canadian based manufacturer and supplier of complete fire protection systems for industrial and commercial projects. Since 1984, inControl Systems Inc. has been designing and supplying fire protection systems and solutions for important projects in many industrial sectors around the world. Installations include projects in Oil and gas, marine and offshore, and land-based projects such as machine protection, server rooms, power plants, steel plants and cement factories.
 
Along with the manufactured products, inControl Systems Inc. designs and supplies complete engineered Fire Protection Systems, Fire Detection Systems and Flame and Gas Detection Systems.  inControl Systems Inc. provides products and solutions based upon internationally accepted standards and regulatory approvals to meet the requirements of the world’s most sophisticated and complex projects.

To have someone from our sales team contact, please click here contactus@incontrolsystems.net

 

Torrent Series Automatic Extinguisher

Torrent Series Automatic Extinguisher

inControl Systems Torrent Series Automatic Fire Extinguishers act fast to stop fires before they can spread and damage your assets.

Canadian Fire Protection Company Expanding Globally

Canadian Fire Protection Company Expanding Globally

For Immediate Release

Ontario, Canada – October 1, 2014 - inControl Systems Inc. a manufacturer and supplier of complete fire protection and detection systems, are celebrating a 30 year anniversary.

inControl Systems were so busy offering fire protection solutions to our clients and researching new and better ways to keep people and businesses safe, that our 30 year anniversary seems to have crept up on us. 

This is a hallmark moment for the company, a time to celebrate and a time to evaluate. 

As we move beyond 30 years in the business, we have asked ourselves critical questions that any company would. Are our clients happy? Is there anything we can do to better serve them? Are our suppliers happy? How about our executives?

inControl Systems recently moved and expanded into new facilities, providing larger office space,  great capacity in our factory, and a more robust R&D facility. 

One thing that is crucial moving forward is having a new and expanded website geared towards you and your business. After 30 years, we've collected a lot of data on what we've done, where we've done it and what we have fleshed out expertise in. Sometimes our clients ask us questions like "have you ever done a job in India?" or "what solution do you recommend for fire protection of an archive?" not knowing that we've done plenty. 

What we've done is created a digital space that makes our work transparent. Check out our “Project References” listed by country to better see what countries we've worked in or see the "Special Applications" tab for just a few of the areas we're great at servicing. Here’s the site: www.incontrolsystems.net – what do you think?

Thank you to everyone that has supported us this long.  

A very special thank you is sent out to our clients around the world for believing in inControl Systems.  Also, a massive thank you to our suppliers and partners who remain committed to supporting our aggressive growth plans over the next few years.

About inControl Systems Inc.

From the company headquarters in Toronto, Canada, inControl Systems Inc. is a manufacturer and a supplier of complete fire protection systems for industrial and commercial projects. Since 1984, inControl Systems Inc has been designing and supplying fire protection systems and solutions around the world for important projects in many industrial sectors. Installations include projects in Oil and gas, marine and offshore, and land-based projects such as machine protection, server rooms, power plants, steel plants and cement factories.

Along with the manufactured products, inControl Systems Inc designs and supplies complete engineered Fire Protection Systems, Fire Detection Systems and Flame and Gas Detection systems. inControl Systems Inc. provides products and solutions based upon internationally accepted standards and regulatory approvals designed to meet the requirements of the world’s most sophisticated and complex projects.

 For more information on InControl Systems Inc., please call us at + 1 905 415 0400 or visit us on the web at incontrolsystems.net